DESCRIPTION
The MMC3416xPJ is a complete 3-axis magnetic sensor with on-chip signal processing and integrated I2C bus. The device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources. It can measure magnetic fields within the full scale range of ±16 Gauss (G), with 0.5 mG/2 mG per LSB resolution for 16/14 bits operation mode and 1.5 mG total RMS noise level, enabling heading accuracy of 1º in electronic compass applications. Contact Memsic for access to advanced calibration and tilt-compensation algorithms.

FEATURES
• Fully integrated 3-axis magnetic sensor and
   electronic circuits requiring fewer external
   components
• Superior Dynamic Range and Accuracy:
   ➢ ±16 G FSR with 16/14 bits operation
   ➢ 0.5 mG/2 mG per LSB resolution in 16/14
      bits operation mode
   ➢ 1.5 mG total RMS noise
   ➢ Enables heading accuracy of ±1º
• Max output data rate of 800 Hz (12 bits mode)
• Ultra Small Low profile package
   1.6x1.6x0.6 mm
• SET/RESET function
   ➢ Allows for elimination of temperature
      variation induced offset error (Null field
      output)
   ➢ Clears the sensors of residual
      magnetization resulting from strong
      external fields
• On-chip sensitivity compensation
• Low power consumption (140 µA @ 7 Hz )
• 1 µA (max) power down function
• I2C Slave, FAST (≤400 KHz) mode
• 1.62 V~3.6 V wide power supply operation
   supported, 1.8 V I/O compatibility.
• RoHS compliant

APPLICATIONS
   Electronic Compass & GPS Navigation
   Position Sensing