DESCRIPTION
The MMC5883MA is a complete 3-axis magnetic sensor with on-chip signal processing and integrated I2C bus suitable for use in various applications. The device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources. It can measure magnetic fields within the full scale range of 8Gauss (G), with 0.25mG per LSB resolution at 16bits operation mode and 0.4mG total RMS noise level, enabling heading accuracy of 1º in electronic compass applications. Contact MEMSIC for access to advanced calibration and tilt-compensation algorithms.

FEATURES
• Fully integrated 3-axis magnetic sensor and
   electronic circuits requiring fewer external
   components
• Superior Dynamic Range and Accuracy:
   ➢ ±8G FSR with 16bits operation
   ➢ 0.25mG per LSB resolution
   ➢ 0.4mG total RMS noise
   ➢ Enables heading accuracy of ±1º
• Max output data rate of 600Hz
• Industrial Standard Low profile package
   3.0x3.0x1.0mm
• Degaussing with built-in SET/RESET function
   ➢ Eliminates thermal variation induced offset
      error (Null field output)
   ➢ Clears the residual magnetization resulting
      from strong external fields
• On-chip sensitivity compensation
• On-chip temperature sensor
• Motion_Detection and Data_Ready Interrupt
• Low power consumption
• 1µA power down current
• I2C Slave, FAST(≤400KHz) mode
• 2.5V single low power supply
• 1.8V I2C interface
• RoHS compliant
• P2P compatible with HMC5883L

APPLICATIONS
• Electronic Compass & Navigation
• Position Sensing
• General Purpose Magnetic Field
   Measurements