DESCRIPTION
The MMC5633NJL is a monolithic complete 3-axis AMR magnetic sensor with on-chip signal processing and integrated digital bus (I2C fast mode and I3C interface), the device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources.
It can measure magnetic fields within the full scale range of 30 Gauss (G), with up to 0.0625mG per LSB resolution at 20bits operation mode and 2mG total RMS noise level, enabling heading accuracy of ±1º in electronic compass applications. Contact MEMSIC for access to advanced calibration and tilt-compensation algorithms.

FEATURES
• Monolithic integrated 3-axis AMR magnetic
   sensor and electronic circuits requiring fewer
   external components
• Superior Dynamic Range and Accuracy:
   ➢ ±30 G FSR
   ➢ 20bits operation mode
   ➢ 0.0625mG per LSB resolution
   ➢ 2 mG total RMS noise
   ➢ Enables heading accuracy of ±1º
• Sensor true frequency response up to 1KHz
• Ultra-Small Wafer Level Package 0.85x0.85x0.4
   mm
• On-chip automatic degaussing with built-in
   SET/RESET function
   ➢ Eliminates thermal variation induced offset
      error (Null field output)
   ➢ Clears the residual magnetization resulting
      from strong external fields
• On-chip sensitivity compensation
• On-chip temperature sensor
• Selftest signal available
• Data_ready Interrupt (I3C only)
• Low power consumption
• 1 µA power down current
• I2C slave, FAST (≤400 KHz) mode
• I3C interface, Compatible with MIPI I3C
   specfication version 1.0
• 1.62V to 3.6V wide range single power supply
• 1.2V compatible I2C interface
• 1.8V compatible I3C interface
• RoHS compliant

APPLICATIONS
• Electronic Compass & GPS Navigation
• Position Sensing