IDT7026L35G 데이터 시트보기 (PDF) - Integrated Device Technology
부품명
상세내역
일치하는 목록
IDT7026L35G Datasheet PDF : 18 Pages
| |||
IDT7026S/L
High-Speed 16K x 16 Dual-Port Static RAM
Description
The IDT7026 is a high-speed 16K x 16 Dual-Port Static RAM. The
IDT7026 is designed to be used as a stand-alone Dual-Port RAM or as
a combination MASTER/SLAVE Dual-Port RAM for 32-bit-or-more word
systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 32-
bit or wider memory system applications results in full-speed, error-free
operation without the need for additional discrete logic.
This device provides two independent ports with separate control,
address, and I/O pins that permit independent, asynchronous access for
reads or writes to any location in memory. An automatic power down
Military, Industrial and Commercial Temperature Ranges
feature controlled by CE permits the on-chip circuitry of each port to enter
a very low standby power mode.
Fabricated using CMOS high-performance technology, these de-
vices typically operate on only 750mW of power.
The IDT7026 is packaged in a ceramic 84-pin PGA, and a 84-pin
PLCC. Military grade product is manufactured in compliance with MIL-
PRF-38535 QML, making it ideally suited to military temperature appli-
cations demanding the highest level of performance and reliability.
Pin Configurations(1,2,3)
INDEX
I/O8L
I/O9L
I/O10L
I/O11L
I/O12L
I/O13L
GND
I/O14L
I/O15L
VCC
GND
I/O0R
I/O1R
I/O2R
VCC
I/O3R
I/O4R
I/O5R
I/O6R
I/O7R
I/O8R
11 10 9 8 7 6 5 4 3 2 1 84 83 82 81 80 79 78 77 76 75
12
74
13
73
14
72
15
71
16
70
17
69
18
68
19
67
20
IDT7026J
66
21
J84(4)
65
22
84-Pin PLCC
64
23
Top View(5)
63
24
62
25
61
26
60
27
59
28
58
29
57
30
56
31
55
32
54
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53
A8L
A7L
A6L
A5L
A4L
A3L
A2L
A1L
A0L
BUSYL
GND
M/S
BUSYR
A0R
A1R
A2R
A3R
A4R
A5R
A6R
A7R
2939 drw 02
NOTES:
1. All Vcc pins must be connected to the power supply.
2. All GND pins must be connected to the ground supply.
3. Package body is approximately 1.15 in x 1.15 in x .17 in.
4. This package code is used to reference the package diagram.
5. This text does not indicate orientation of the actual part-marking.
6.242
Share Link: 