General Description
SSD1805 is a single-chip CMOS LCD driver with controller for dot-matrix graphic liquid crystal display system. SSD1805 consists of 200 high-voltage driving output pins for driving maximum 132 Segments, 68 Commons / 132 Segments, 64 Commons and 1 icon-driving Common / 132 Segments, 54 Commons and 1 icon-driving Common / 132 Segments, 32 Commons and 1 icon-driving Common. SSD1805 can also be switched among 32, 54, 64 or 68 display multiplex ratios by hardware pin selection.
FEATURES
• Power Supply: VDD = 1.8V – 3.6V
VDDIO = 1.8V – 3.6V
VCI = 1.8V – 3.6V
• LCD Driving Output Voltage: VLCD = +12.5V
• Low Current Sleep Mode
• Pin selectable 68/64/54/32 multiplex ratio configuration. Maximum display size:
o 132 columns by 68 rows
o 132 columns by 64 rows with one icon line
o 132 columns by 54 rows with one icon line
o 132 columns by 32 rows with one icon line
• 8-bit 6800-series / 8080-series Parallel Interface, 4-wires Serial Peripheral Interface
• On-Chip 132 X 68 = 8976 bits Graphic Display Data RAM
• Column Re-mapping and RAM Page scan direction control
• Vertical Scrolling by Common
• On-Chip Voltage Generator or External LCD Driving Power Supply Selectable
• Pin selectable 2X/3X/4X/5X On-Chip DC-DC Converter with internal flying capacitors.
• 64 Levels Internal Contrast Control
• Programmable LCD Driving Voltage Temperature Compensation Coefficients
• On-Chip Bias Divider with internal compensation capacitors (except VOUT)
• Programmable multiplex ratio: 1/9 to 1/68
• Programmable bias ratio: 1/4, 1/5, 1/6, 1/7, 1/8, 1/9
• Display Offset Control
• Non-Volatile Memory (OTP) for calibration