Description
The CS8361 is a precision micro power dual voltage regulator with ENABLE and RESET.
The 5V standby output is accurate within ±2% while supplying loads of 100mA and has a typical dropout voltage of 400mV. Quiescent current is low, typically 140µA with a 300µA load. The active RESET output monitors the 5V standby output and holds the RESET line low during power up and regulator dropout conditions. The RESET circuit includes hysteresis and is guaranteed to operate correctly with 1V on the standby output.
The second output tracks the 5V standby output through an external adjust lead, and can supply loads of 250mA with a typical dropout voltage of 400mV. The logic level ENABLE lead is used to control this tracking regulator output.
Both outputs are protected against overvoltage, short circuit, reverse battery and overtemperature conditions. The robustness and low quiescent current of the CS8361 makes it not only well suited for automotive microprocessor applications, but for any battery powered micro processor applications.

FEATUREs
■ 2 Regulated Outputs
   Standby Output 5V
   ±2%; 100mA
   Tracking Output 5V;
   250mA
■ Low Dropout Voltage (0.4V at rated current)
■ RESET Option
■ ENABLE Option
■ Low Quiescent Current
■ Protection Features
   Independent Thermal
   Shutdown
   Short Circuit
   60V Load Dump
   Reverse Battery