GENERAL DESCRIPTION
The AK4586 is a single chip CODEC that includes two channels of ADC and six channels of DAC. The
ADC outputs 24bit data and the DAC accepts up to 24bit input data. The ADC has the Enhanced Dual Bit architecture with wide dynamic range. The DAC introduces the new developed Advanced Multi-Bit architecture, and achieves wider dynamic range and lower outband noise.

FEATURES

2ch 24bit ADC
- 64x Oversampling
- Sampling Rate up to 96kHz
- Linear Phase Digital Anti-Alias Filter
- Single-Ended Input
- S/(N+D): 90dB
- Dynamic Range, S/N: 100dB
- Digital HPF for offset cancellation
- Overflow flag

6ch 24bit DAC
- 128x Oversampling
- Sampling Rate up to 96kHz
- 24bit 8 times Digital Filter
- Single-Ended Outputs
- On-chip Switched-Capacitor Filter
- S/(N+D): 90dB
- Dynamic Range, S/N: 106dB
- Individual channel digital volume with 256 levels and 0.5dB step
- Soft mute
- Zero Detect Function
4 inputs 24bit DIR
- Supports IEC60958 consumer mode, S/PDIF, EIAJ CP1201 consumer mode
- Low jitter Analog PLL
- PLL Lock Range: 32k ∼ 96kHz
- Clock Source: PLL or X'tal
- 4 channel Receivers input and 1 through transmission output
- De-emphasis for 32kHz, 44.1kHz and 48kHz
- Dedicated Detect Pins Non-PCM Bit Stream Detect, DTS-CD Bit Stream Detect, Validity Flag Detect, 96kHz Sampling Detect, Unlock & Parity Error Detect, Emphasis Detect, fs change Detect
- Supports up to 24bit Audio Data Format
- Audio I/F: Master or Slave Mode
- 32bits Channel Status Buffer
- Burst Preamble bit Pc, Pd Buffer for Non-PCM bit stream
- Master Clock Outputs:128fs/256fs/512fs
I/F format: MSB justified, LSB justified(20bit,24bit), I2S or TDM
High Jitter Tolerance
TTL Level Digital I/F
4-wire Serial and I2C Bus µP I/F for mode setting
Extenal Master Clock Input:
  - 256fs, 384fs or 512fs for fs=44.1kHz to 48kHz
  - 128fs, 192fs or 256fs for fs=88.2kHz to 96kHz
Power Supply: 4.5 to 5.5V
Power Supply for output buffer: 2.7 to 5.5V
Small 44pin LQFP