NCP15XH103J03RC 데이터 시트보기 (PDF) - Murata Manufacturing

부품명

상세내역

일치하는 목록

NCP15XH103J03RC

NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size

Murata Manufacturing 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

R44E.pdf

Dec.17,2012

Temperature Sensor Thermo String Type Specifications and Test Methods

Continued from the preceding page.

No.

Item

11 Free Fall

Specifications

Test Methods

NTC Thermistor shall be dropped without any force onto

concrete floor from 1 meter height one time.

NTC Thermistor shall be fixed to the vibration test equipment.

Vibration of total 1.5 mm amplitude, Frequency sequence of

10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right

angled 3 directions for each 2 hours duration.

12 Vibration

· Resistance (R25°C) fluctuation rate: less than ±1%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

· No visible damage at resin part.

Mount

Solder is attached

from the reverse side.

Oscillating

Direction Z

Oscillating

Direction X

* · R25 is zero-power resistance at 25°C.

· B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C.

· After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).

Oscillating

Direction Y

5

27

Share Link: