NCP15XH103J03RC 데이터 시트보기 (PDF) - Murata Manufacturing

부품명

상세내역

일치하는 목록

NCP15XH103J03RC

NTC Thermistors Temperature Sensor and Compensation 0402 (1005) Size

Murata Manufacturing 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

R44E.pdf

Dec.17,2012

Temperature Sensor and Compensation Chip Type !Caution/Notice

Continued from the preceding page.

7. Printing Conditions of Solder Paste

o The amount of solder is critical. Standard height of fillet is

shown in the table below.

o Too much soldering may cause mechanical stress,

resulting in cracking, mechanical and/or electronic

damage.

Reference: Optimum Solder Amount

E

T

Electrode

Solder

Solder

Part Number

NCP03

NCP15

NCP18/NCP21

The Solder Paste Thickness

100μm

150μm

200μm

T

1/3EVTVE

1/3EVTVE

0.2mmVTVE

8. Adhesive Application and Curing

o Thin or insufficient adhesive may result in loose

component contact with land during flow soldering.

o Low viscosity adhesive causes chips to slip after

mounting.

21

Share Link: