GENERAL DESCRIPTION
The VSC9180 is a multi-rate SONET/SDH transceiver with support for working and protection hitless backplane 1+1 protection. It is designed to serialize four STS-12/STM-4 signals, or byte interleaved SONET/SDH data from 4-bit 622MHz or 16-bit 155MHz parallel buses onto redundant 2.5Gb/s serial backplane outputs.
FEATURES :
Parallel to Serial Transmit
► Receives 16 or 4-Bit Parallel LVDS/LVPECL Inputs Operating
at 155MHz or 622MHz into Internal FIFO using Source
Synchronous Timing
► 16-Bit 155MHz Bus or 4-Bit 622MHz Bus is Bit Multiplexed
to Serial 2.5GHz Output
► Retimes Four Serial STS-12/STM-4 Inputs and Deskews up
to +/- 3 Bytes of Skew using the A1/A2 Boundaries
► Byte Interleaves Four Serial STS-12/STM-4 Inputs to Create
an STS-48 like Signal
► Clear Channel Non-SONET/SDH Capability and Support for
Both SONET/SDH and G.709 OTU1 Frames
Serial to Parallel Receive
► Dual 2.5Gb/s Frequency Synchronous Serial CML Inputs
with Onboard Clock and Data Recovery
► Onboard Frame Alignment of Received Signals and Large
Internal FIFO for Tolerance of up to +/-75ns of Serial
Backplane Skew
► Realignment of Incoming Signals Allows Hitless Selection of
Incoming Channel for Maintenance Purposes, and Prevents
Downstream Devices from Having to Reframe in a Failure
Condition
VSC9180 Arapahoe - 2.5G SONET/SDH Backplane Transceiver
► Hardware Based Switch Over within Receipt of Two or Four Errored
Frame Boundaries
► Loss of Signal, Loss of Alignment, and Loss of Frame Alarm Indication
► Received Frame Pointer Output
► Programmable BER Threshold Monitors Based on B1 Parity Monitoring
of Both Serial Inputs
► Returns 16 or 4-Bit Parallel LVDS Bit De-multiplexed Outputs Operating
at 155MHz or 622MHz with Recovered Bus Clock (Non Interleave Mode)
► Returns Quad STS-12/STM-4 Outputs Operating at 622 Mb/s (Interleave Mode)
► Clear Channel Non-SONET/SDH Capability and Support for Both
SONET/SDH and G.709 OTU1 Frames
Special Features
► 4-Bit or 16-Bit Parallel Bus Loopback with Output Bus Clock
► Parallel Loopback also Allows Quad STS-12/STM-4 Retime, Realign, and
Loopback Output
► Serial Loopback with Hitless Input Selection and Realignment
► Onboard Discrete CMU and CRU to Accommodate Non-synchronous
TX/RX Applications