General Description
The TH8053 is a fault tolerant CAN-Transceiver which works as an interface between the CAN protocol controller and the physical CAN bus. It is designed to connect up to 40 control nodes in passenger cars with an overall cable length of up to 80m enabling data trans-mission/reception rates up to 125 kBaud using unshielded bus wires.

FEATUREs and Benefits
❐ Baud rate up to 125k Baud
❐ Up to 40 nodes can be connected
❐ Automotive temperature range from -40°C...125°C
❐ Very low standby current
❐ Short circuit protection of bus lines to VDD, ground and battery
❐ Wake up capability from bus line or wake up pin
❐ Supports unshielded bus wire
❐ Integrated receiver filters
❐ Permanent dominant monitoring of transmit data input
❐ Automatic switching to single wire mode in case of bus failures and automatic reset to differential mode if bus failure disappeared
❐ One wire transmission mode with ground offset up to 1.5V possible
❐ Very low RFI due internal slope control of bus drivers
❐ Good immunity to EMC
❐ Thermal protection of bus line drivers