DESCRIPTION
The ST8016S is a 160-output segment/common driver IC suitable for driving large/medium scale dot matrix LCD panels, and is used in personal computers/work stations. The ST8016S is good both as a segment driver and a common driver, and it can create a low power consuming, high-resolution LCD.

FEATURES
■ Number of LCD drive outputs: 160
■ Supply voltage for LCD drive: +15.0 to +30.0 V
■ Supply voltage for the logic system: +2.5 to +5.5 V
■ Low power consumption
■ Low output impedance

(Segment mode)
■ Shift clock frequency
    - 20 MHz (MAX.): VDD = +5.0 ± 0.5 V
    - 15 MHz (MAX.): VDD = +3.0 to + 4.5 V
    - 12 MHz (MAX.): VDD = +2.5 to + 3.0 V
■ Adopts a data bus system
■ 4-bit/8-bit parallel input modes are selectable with a mode (MD) pin
■ Automatic transfer function of an enable signal
■ Automatic counting function which, in the chip selection mode, causes the internal clock to be stopped by automatically counting 160 bits of input data
■ Line latch circuits are reset when /DISPOFF active

(Common mode)
■ Shift clock frequency: 4 MHz (MAX.)
■ Built-in 160-bit bi-directional shift register (divisible into 80 bits x 2)
■ Available in a single mode (160-bit shift register) or in a dual mode (80-bit shift register x 2)
    ➤ Y1->Y160 Single mode
    ➤ Y160->Y1 Single mode
    ➤ Y1->Y80, Y81->Y160 Dual mode
    ➤ Y160->Y81, Y80->Y1 Dual mode
        The above 4 shift directions are pin-selectable
■ Shift register circuits are reset when /DISPOFF active