Introduction
The SDA 9410 is a new component of the Micronas MEGAVISION® IC set, which enables the system to reduce large area and line flickering of interlaced TV standards.

FEATUREs
• Different application modes
    - SRC mode:
    - High performance scan rate converter
    - High performance scan rate converter plus high resolution frame based joint-linefree Picture-in-Picture (maximum approximately 1/9 picture)
    - SSC mode:
    - Split screen applications with two signal sources (e.g. double window)
    - MUP mode:
    - Multipicture display mode (e.g. tuner scan)
• 8 bit amplitude resolution of each input channel
    - Two input channels
    - Input frequency up to 27 MHz
    - ITU-R 656 data format (8 wires data only and additional sync information or 8 wires including sync information)
    - 4:2:2 luminance and chrominance parallel (2x8 wires)
• Two different representations of input chrominance data
    - 2’s complement code
    - Positive dual code
• Two flexible input sync controllers
• Vertical peaking of the input signal
• Flexible scaling of the input signal
    - Flexible digital vertical compression of the input signal (1.0, ... [2 line resolution] ... , 1/32)
    - Flexible horizontal compression and expansion of the input signal (2.0, ... [4 pixel resolution] ... ,1.0 , ... [4 pixel resolution] ... , 1/32)
    - Panorama mode (programmable characteristic)
• Noise reduction
    - Motion adaptive spatial and temporal noise reduction (3D-NR)
    - Temporal noise reduction for luminance and chrominance, frame based or field based
    - Different motion detectors for luminance and chrominance or identical
    - Flexible programming of the temporal noise reduction parameters
    - Automatic measurement of the noise level (5 bit value, readable by I²C-bus)
• 3-D motion estimation
    - High performance motion estimation based on block matching algorithm
    - Film mode detector (PAL and NTSC), Global motion flag (readable by I²C bus)
• Automatic detection of letter box formats (readable by I²C bus)
• TV mode detection by counting line numbers (PAL, NTSC, readable by I²C bus)
• Embedded memory
    - 6 Mbit embedded DRAM core for field memories
    - 1,1 Mbit embedded DRAM core for line memories, vector memory, block-to-line converter
    - 36 kbit SRAM for block matching, line-to-block converter
(Continue ...)