Description
The SD3303 is a set-up DC-DC converter that delivers a regulated output current. The device switches at a 1.0MHz constant frequency, allowing for the use of small value external inductor and ceramic capacitors.
The SD3303 is targeted to be used for driving loads up to 1A from a two-cell alkaline battery. The LED current can be programmed by the external current sense resistor, RS, connected between the feedback pin (FB) and ground. A low 95mV feedback voltage reduces the power loss in the Rs for better efficiency. With its internal 2A, 100mΩ NMOS switch, the device can provide high efficiency even at heavy load. During the shutdown mode, the feedback resistor RS and the load are completely disconnected and the current consumption is reduced to less than 1µA.
The SD3303 is available in the 6-lead TSOT26 package.

FEATUREs
• LED Power Efficiency: up to 90%
• Current Accuracy: 5%(VIN = 3.6V to 1.8V @VF = 3.7V)
• Low Start-Up Voltage: 0.9V (ILED = 270mA)
• Low Hold Voltage: 0.75 (ILED = 200mA)
• 1MHz Switching Frequency
• Uses Small, Low Profile External Components
• Low RDS(ON): 100mΩ (typ)
• Over Temperature Protection
• Low Profile TSOT26 Package
• Pb-Free Package

APPLICATIONs
• White LED Torch (Flashlight)
• White LED Camera Flash
• DSC(Digital Still Camera)Flash
• Cellular Camera Phone Flash
• PDA Camera Flash
• Camcorder Torch(Flashlight) Lamp