datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크
HOME  >>>  Philips Electronics  >>> SA58641 PDF

SA58641 데이터시트 - Philips Electronics

SA58641 image

부품명
SA58641

Other PDF
  no available.

PDF
DOWNLOAD     

page
17 Pages

File Size
169.2 kB

제조사
Philips
Philips Electronics Philips

DESCRIPTION
The SA58641 is a high performance monolithic FM IF system with high-speed RSSI incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic received signal strength indicator (RSSI), voltage regulator, wideband data output and fast RSSI op amps. The SA58641 is available in 20-lead SSOP (shrink small outline package).
The SA58641 was designed for high bandwidth portable communication applications and will function down to 2.7 V. The RF section is similar to the famous SA605. The data output has a minimum bandwidth of 600 kHz. This is designed to demodulate wideband data. The RSSI output is amplified. The RSSI output has access to the feedback pin. This enables the designer to adjust the level of the outputs or add filtering.
SA58641 incorporates a power-down mode which powers down the device when Pin 8 is LOW. Power down logic levels are CMOS and TTL compatible with high input impedance.


FEATURES
• Wideband data output (600 kHz min.)
• Fast RSSI rise and fall times
• Low power consumption: 7.5 mA typ. at 5 V
• Mixer input to >500 MHz
• Mixer noise figure of 12 dB at 240 MHz
• XTAL oscillator effective to 150 MHz (L.C. oscillator to 1 GHz local
   oscillator can be injected)
• 92 dB of IF Amp/Limiter gain
• 25 MHz limiter small signal bandwidth
• Temperature compensated logarithmic Received Signal Strength
   Indicator (RSSI) with a dynamic range in excess of 90 dB
• RSSI output internal op amp
• Internal op amps with rail-to-rail outputs
• Low external component count; suitable for crystal/ceramic/LC
   filters
• Excellent sensitivity: 0.54 µV into 50 Ω matching network for
   12 dB SINAD (Signal to Noise and Distortion ratio) for 1 kHz tone
   with RF at 240 MHz and IF at 10.7 MHz
• ESD hardened
• 10.7 MHz filter matching (330 Ω)
• Power-down mode (ICC = 200 µA)


APPLICATIONS
• DECT (Digital European Cordless Telephone)
• Digital cordless telephones
• Digital cellular telephones
• Portable high performance communications receivers
• Single conversion VHF/UHF receivers
• FSK and ASK data receivers
• Wireless LANs

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

부품명
상세내역
PDF
제조사
High performance mixer FM IF system with high-speed RSSI
NXP Semiconductors.
Low voltage high performance mixer FM IF system with high-speed RSSI
NXP Semiconductors.
Low voltage high performance mixer FM IF system with high-speed RSSI ( Rev : 1997 )
Philips Electronics
Low voltage high performance mixer FM IF system with high-speed RSSI
NXP Semiconductors.
Low voltage high performance mixer FM IF system with high-speed RSSI
Philips Electronics
High performance low power mixer FM IF system with high-speed RSSI
Philips Electronics
High performance low power FM IF system with high-speed RSSI
Philips Electronics
High performance low power FM IF system with high-speed RSSI
Philips Electronics
Low voltage high performance mixer FM IF system
Philips Electronics
High performance low power mixer FM IF system ( Rev : 1997 )
Philips Electronics

Share Link: GO URL

EnglishEnglish Chinese简体中文 Japanese日本語 Russianрусский Spanishespañol

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]