Description
RailClamps® are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients).
The unique design incorporates two identical circuits. Each circuit is comprised of surge rated, low capacitance steering diodes and a TVS diode in a single package. During transient conditions, the steering diodes direct the transient current to ground. The internal TVS diode clamps the transient voltage to a safe level. The RClamp0524S has a low maximum capacitance of only 5pF per line. Each device will protect up to four data lines. The dual circuits make it ideal for applications like power over Ethernet (PoE) where each signal pair sits at a different potential.

FEATUREs
◆ ESD protection for high-speed data lines to
   IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
   IEC 61000-4-4 (EFT) 40A (5/50ns)
◆ Array of surge rated diodes with internal TVS Diode
◆ Small package saves board space
◆ Protects four I/O lines
◆ Low capacitance: 5pF maximum
◆ Low clamping voltage
◆ Low operating voltage: 5.0V
◆ Solid-state silicon-avalanche technology

APPLICATIONs
◆ PoE
◆ Monitors and Flat Panel Displays
◆ Digital Video Interface (DVI)
◆ 10/100/1000 Ethernet
◆ Notebook Computers