SUMMARY DESCRIPTION
The PSD family of Programmable Microcontroller (MCU) Peripherals brings In-System Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD devices combine many of the peripheral functions found in MCU based applications.

FEATURES SUMMARY
■ DUAL BANK FLASH MEMORIES
    – 1 Mbit of Primary Flash Memory (8 Uniform Sectors)
    – 256 Kbit Secondary EEPROM (4 Uniform Sectors)
    – Concurrent operation: read from one memory while erasing and writing the other
■ 16 Kbit SRAM (BATTERY-BACKED)
■ PLD WITH MACROCELLS
    – Over 3,000 Gates Of PLD: DPLD and CPLD
    – DPLD - User-defined Internal chip-select decoding
    – CPLD with 16 Output Macrocells (OMCs) and 24 Input Macrocells (IMCs)
■ 27 RECONFIGURABLE I/Os
    – 27 individually configurable I/O port pins that can be used for the following functions: MCU I/Os; PLD I/Os; Latched MCU address output; and Special function I/Os.
    Note: 16 of the I/O ports may be configured as open-drain outputs.
■ ENHANCED JTAG SERIAL PORT
    – Built-in JTAG-compliant serial port allows full-chip In-System Programmability (ISP)
    – Efficient manufacturing allows for easy product testing and programming
■ PAGE REGISTER
    – Internal page register that can be used to expand the microcontroller address space by a factor of 256.
■ PROGRAMMABLE POWER MANAGEMENT
■ HIGH ENDURANCE:
    – 100,000 Erase/WRITE Cycles of Flash Memory
    – 10,000 Erase/WRITE Cycles of EEPROM
    – 1,000 Erase/WRITE Cycles of PLD
    – Data Retention: 15-year minimum at 90°C (for Main Flash, Boot, PLD and Configuration bits).
■ SINGLE SUPPLY VOLTAGE:
    – 3.3V±10% for PSD813F1V
■ STANDBY CURRENT AS LOW AS 50µA