제조사
Pericom Semiconductor Corporation
Description
Pericom Semiconductor’s PI3C3384 is a 2.5V or 3.3V, high bandwidth 10-bit, 2-port bus switches designed with a low On-Resistance allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switches are turned ON by the Bus Enable (BE) input signal. Two bus enable signals are provided, one for each of the upper and lower five bits of the two 10-bit buses.
FEATUREs
• Near-Zero propagation delay
• 5-ohm switches connect inputs to outputs
• High Bandwidth (>400 MHz)
• Permits Hot Insertion.
• Rail-to-Rail, 3.3V or 2.5V Switching
• 5V I/O Tolerant
• 2.5V Supply Voltage Operation
• Packaging (Pb-free & Green):
– 24-pin 150-mil wide plastic QSOP (Q)
APPLICATIONs
• High Bandwidth Data switching
• Hot Docking
2.5V/3.3V, High Bandwidth, Hot-Insertion, 10-Bit, 2-Port, Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion, 20-Bit, 2-Port Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 32-Bit, 2-Port, Bus Switch ( Rev : 1999 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 32-Bit, 2-Port, Bus Switch
Pericom Semiconductor Corporation
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch ( Rev : 2010 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch ( Rev : 1999 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch ( Rev : 2011 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch ( Rev : 2010 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch
Pericom Semiconductor
