General description
The NX3L4684 provides two low-ohmic single-pole double-throw analog switches, suitable for use as an analog or digital multiplexer/demultiplexer. It has a digital select input (nS) with Schmitt trigger action, two independent inputs/outputs (nY0, nY1) and a common input/output (nZ). Schmitt trigger action at the select input (nS) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V.
A low input voltage threshold allows pin nS to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3L4684 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.

FEATUREs
■ Wide supply voltage range from 1.4 V to 4.3 V
■ Very low ON resistance (peak) for Y0 port:
   ♦ 0.8 Ω (typical) at VCC = 1.4 V
   ♦ 0.5 Ω (typical) at VCC = 1.65 V
   ♦ 0.3 Ω (typical) at VCC = 2.3 V
   ♦ 0.25 Ω (typical) at VCC = 2.7 V
   ♦ 0.25 Ω (typical) at VCC = 4.3 V
■ Break-before-make switching
■ High noise immunity
■ ESD protection:
   ♦ HBM JESD22-A114F Class 3A exceeds 4000 V
   ♦ MM JESD22-A115-A exceeds 200 V
   ♦ CDM AEC-Q100-011 revision B exceeds 1000 V
■ CMOS low-power consumption
■ Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
■ 1.8 V control logic at VCC = 3.6 V
■ Control input accepts voltages above supply voltage
■ Very low supply current, even when input is below VCC
■ High current handling capability (350 mA continuous current under 3.3 V supply)
■ Specified from −40 °C to +85 °C and from −40 °C to +125 °C

APPLICATIONs
■ Cell phone
■ PDA
■ Portable media player