Description
The NCV7340 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller.

FEATUREs
• Compatible with the ISO 11898 Standard (ISO 11898−2, ISO 11898−5 and SAE J2284)
• Low Quiescent Current
• High Speed (up to 1 Mbps)
• Ideally Suited for 12 V and 24 V Industrial and Automotive Applications
• Extremely Low Current Standby Mode with Wakeup via the Bus
• Low EME Common−Mode Choke is No Longer Required
• Voltage Source via VSPLIT Pin for Stabilizing the Recessive Bus Level (Further EMC Improvement)
• No Disturbance of the Bus Lines with an Un−powered Node
• Transmit Data (TxD) Dominant Time−out Function
• Thermal Protection
• Bus Pins Protected Against Transients in an Automotive Environment
• Bus and VSPLIT Pins Short−Circuit Proof to Supply Voltage and Ground
• Logic Level Inputs Compatible with 3.3 V Devices
• Up to 110 Nodes can be Connected to the Same Bus in Function of Topology
• These are Pb−Free Devices

Typical Applications
• Automotive
• Industrial Networks