GENERAL DESCRIPTION
   The MX26LV160AT/AB is a 16-mega bit high speed Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXICs high speed Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX26LV160AT/AB is packaged in 44-pin SOP, 48-pin TSOP, and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES
• Extended single - supply voltage range 3.0V to 3.6V
• 2,097,152 x 8 / 1,048,576 x 16 switchable
• Single power supply operation
   - 3.0V only operation for read, erase and program
      operation
• Fast access time: 55/70ns
• Low power consumption
   - 30mA maximum active current
   - 30uA typical standby current
• Command register architecture
   - Byte/word Programming (55us/70us typical)
   - Sector Erase (Sector structure 16K-Bytex1,
      8K-Bytex2, 32K-Bytex1, and 64K-Byte x31)
• Auto Erase (chip & sector) and Auto Program
   - Automatically erase any combination of sectors with
      erase verify capability
   - Automatically program and verify data at specified
      address
• Status Reply
   - Data# polling & Toggle bit for detection of program
      and erase operation completion
• Ready/Busy# pin (RY/BY#)
   - Provides a hardware method of detecting program or
      erase operation completion
• Sector protection
   - Hardware method to disable any combination of
      sectors from program or erase operations
   - Temporary sector unprotect allows code changes in
      previously locked sectors
• CFI (Common Flash Interface) compliant
   - Flash device parameters stored on the device and
      provide the host system to access
• 2K minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Boot Sector Architecture
   - T = Top Boot Sector
   - B = Bottom Boot Sector
• Package type:
   - 44-pin SOP
   - 48-pin TSOP
   - 48-ball CSP
• Compatibility with JEDEC standard
   - Pinout and software compatible with single-power
      supply Flash
• 20 years data retention