GENERAL DESCRIPTION
The MACH® 4 family from Lattice offers an exceptionally flexible architecture and delivers a superior Complex Programmable Logic Device (CPLD) solution of easy-to-use silicon products and software tools. The overall benefits for users are a guaranteed and predictable CPLD solution, faster time-to-market, greater flexibility and lower cost. The MACH 4 devices offer densities ranging from 32 to 256 macrocells with 100% utilization and 100% pin-out retention. The MACH 4 family offer 5-V (M4-xxx) and 3.3-V (M4LV-xxx) operation.
MACH 4 products are 5-V or 3.3-V in-system programmable through the JTAG (IEEE Std. 1149.1) interface. JTAG boundary scan testing also allows product testability on automated test equipment for device connectivity.

FEATURES
◆ High-performance, E2CMOS 3.3-V & 5-V CPLD families
◆ Flexible architecture for rapid logic designs
   — Excellent First-Time-FitTM and refit feature
   — SpeedLockingTM performance for guaranteed fixed timing
   — Central, input and output switch matrices
      for 100% routability and 100% pin-out retention
◆ High speed
   — 7.5ns tPD Commercial and 10ns tPD Industrial
   — 111.1MHz fCNT
◆ 32 to 256 macrocells; 32 to 384 registers
◆ 44 to 256 pins in PLCC, PQFP, TQFP and BGA packages
◆ Flexible architecture for a wide range of design styles
   — D/T registers and latches
   — Synchronous or asynchronous mode
   — Dedicated input registers
   — Programmable polarity
   — Reset/ preset swapping
◆ Advanced capabilities for easy system integration
   — 3.3-V & 5-V JEDEC-compliant operations
   — JTAG (IEEE 1149.1) compliant for boundary scan testing
   — 3.3-V & 5-V JTAG in-system programming
   — PCI compliant (-7/-10/-12 speed grades)
   — Safe for mixed supply voltage system designs
   — Bus-FriendlyTM inputs and I/Os
   — Programmable security bit
   — Individual output slew rate control
◆ Advanced E2CMOS process provides high-performance, cost-effective solutions
◆ Supported by ispDesignEXPERTTM software for rapid logic development
   — Supports HDL design methodologies with results optimized for MACH 4
   — Flexibility to adapt to user requirements
   — Software partnerships that ensure customer success
◆ Lattice and third-party hardware programming support
   — LatticePROTM software for in-system programmability support
      on PCs and automated test equipment
   — Programming support on all major programmers including Data I/O,
      BP Microsystems, Advin, and System General