DESCRIPTION
The LD1072 is a 16-channel, constant-current sink, LED driver. Each channel has a individually adjustable12- Bit PWM brightness control and a 64-step/256-step dot correction. The dot correction adjusts the brightness variations between LED channels and other LED Drivers. In 8-Bit Mode, LD1072 has 256-step Programmable Adjust Data Mode which controls 16 output current simultaneously. Both PWM control and dot correction are accessible via a serial interface. An external resistor sets the maximum current value of all 16 channels.
The LD1072 features two error information circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an over temperature status.
FEATURES
• 16 Channels
• 12-Bit (4096 Steps) Grayscale PWM Control
• Dot Correction
- 6-Bit (64 Steps) / 8-Bit (256 Steps)(±33%)
• Programmable Adjust Output Current for 16Channel
- 8-Bit (256 Steps)
• Drive Capability (Constant-Current Sink)
- 0 mA to 80 mA (6-Bit)
- 0 mA to 60 mA (8-Bit)
• LED Power Supply Voltage up to 17 V
• VDD = 3.0 V to 5.5 V
• Serial Data Interface
• Controlled In-Rush Current
• 30-MHz Data Transfer Rate
• CMOS Level I/O
• Error Information
- LOD : LED Open Detection
- TEF : Thermal Error Flag
• Package : 28 Pin TSSOP