High ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers
Intersil’s ISL3179E and ISL3180E are high ESD Protected (see Table 1 below), 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each device has low bus currents (+220µA/-150µA), so it presents a “1/5 unit load” to the RS-485 bus. This allows up to 160 transceivers on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters.
FEATUREs
• High ESD Protection on RS-485 I/O Pins
- ISL3179E . . . . . . . . . . . . . . . . . . . . . ±16.5kV IEC61000
- ISL3180E . . . . . . . . . . . . . . . . . . . . . . . . . . ±12kV HBM
- Class 3 HBM ESD Level on all Other Pins . . . . . . .>9kV
• Specified for +125°C Operation
• High Data Rates. . . . . . . . . . . . . . . . . . . . . . up to 40Mbps
• 5V Tolerant Logic Inputs
• 1/5 Unit Load Allows up to 160 Devices on the Bus
• Full Fail-Safe (Open, Shorted, Terminated/Undriven) Receiver
• Hot Plug - Tx and Rx Outputs Remain Three-State During Power-Up
• Low Quiescent Current . . . . . . . . . . . . . . . . . . 4mA (Max)
• Low Current Shutdown Mode. . . . . . . . . . . . . . 1µA (Max)
• -7V to +12V Common Mode Input Voltage Range
• Three-State Rx and Tx Outputs
• 16/16.5ns (Max) Tx/Rx Propagation Delays; 1.5ns (Max) Skew
• Operates from a Single +3.3V Supply (10% Tolerance)
• Current Limiting and Thermal Shutdown for driver Overload Protection
• Pb-Free (RoHS Compliant)
APPLICATIONs
• Motor Controller/Position Encoder Systems
• Factory Automation
• Field Bus Networks
• Security Networks
• Building Environmental Control Systems
• Industrial/Process Control Networks