DESCRIPTION
The GS9021 implements error detection and handling (EDH) according to SMPTE RP-165. Interfacing to the parallel inputs of either the GS9002, GS9022 or GS9032 serial digital encoders, the GS9021 is primarily used on the transmit end of the SDI interface. The GS9021 provides EDH insertion and extraction for 4ƒsc NTSC, 4ƒsc PAL and all component PAL and NTSC standards including 4:2:2 (13.5MHz and 18MHz luminance sampling), and 4:4:4:4.

FEATURES
• Error Detection and Handling (EDH) according to SMPTE RP-165
• EDH insertion and extraction in one device
• auto-standard operation with override via host interface
• noise immune extraction of HVF timing signals
• TRS insertion/correction and ANC header correction for all standards
• ITU-R-601 output clipping for active picture area
• selectable I²C interface or 8-bit parallel port for access to EDH flags and device configuration bits
• all error flags available on dedicated output pins
• 24-bit Errored Field counter
• BYPASS mode to bypass EDH insertion/updating
• dynamic blanking control input
• 8-bit or 10-bit compatibility
• up to 54MHz operating frequency
• seamless flag-mapping with GS9020 serial digital video input processor
• 64 pin LQFP

APPLICATIONS
    EDH processing for SMPTE 259M serial digital interfaces for composite and component standards including 4:4:4:4 at 540Mb/s; Noise immune digital sync and timing generation. Source, destination, distribution and test equipment; General purpose, TRS formatted, blank video stream generator with EDH.