Description
The EN5336QI is a Power System on Silicon DC-DC converter. It is specifically designed to meet the precise voltage and fast transient requirements of present and future high-performance, low-power processor, DSP, FPGA, memory boards and system level applications in a distributed power architecture. Advanced circuit techniques, ultra high switching frequency, and very advanced, high-density, integrated circuit and proprietary inductor technology deliver highquality, ultra compact, non-isolated DC-DC conversion. Operating this converter requires only small value input and output ceramic capacitors, a soft-start capacitor and a resistor divider for voltage feedback to set the output voltage to the desired value.
FEATUREs
● Integrated INDUCTOR, MOSFETS, Controller
● Footprint 1/3rd that of competing solutions
● Minimum external components
● Up to 10W continuous output power
● 5MHz operating frequency
● High efficiency, up to 93%
● VOUT accuracy 3% over line, load and temp
● Wide input voltage range of 2.375V to 6.6V
● External resistor divider for voltage feedback and output voltage selection
● Output enable pin and Power OK signal
● Programmable soft-start time
● Programmable over-current protection
● Thermal shutdown, short circuit, and UVLO
● Output over-voltage protection
● RoHS compliant, MSL level 3, 260C reflow.
APPLICATIONs
● Point of load regulation for low-power processors, network processors, DSPs, FPGAs, and ASICs
● Notebook computers, servers, workstations
● Broadband, networking, LAN/WAN, optical
● Low voltage, distributed power architectures with 2.5V, 3.3V or 5V rails
● DSL, STB, DVR, DTV, iPC
● Ripple sensitive applications