GENERAL DESCRIPTION
The EN25LF10 is a 1M-bit (128K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.

FEATURES
• Single power supply operation
   - Full voltage range: 2.35-3.6 volt
• Serial Interface Architecture
   - SPI Compatible: Mode 0 and Mode 3
• 1 Mbit Serial Flash
   - 1 M-bit/128 K-byte/512 pages
   - 256 bytes per programmable page
• High performance
   - 75MHz clock rate
• Low power consumption
   - 12 mA typical active current
   - 1 μA typical power down current
• Uniform Sector Architecture:
   - 32 sectors of 4-Kbyte
   - 4 blocks of 32-Kbyte
   - Any sector or block can be
   erased individually
• Software and Hardware Write Protection:
   - Write Protect all or portion of memory via
      software
   - Enable/Disable protection with WP# pin
• High performance program/erase speed
   - Page program time: 1.5ms typical
   - Sector erase time: 150ms typical
   - Block erase time 800ms typical
   - Chip erase time: 2 Seconds typical
• Lockable 256 byte OTP security sector
• Minimum 100K endurance cycle
• Package Options
   - 8 pins SOP 150mil body width
   - 8 contact VDFN
   - All Pb-free packages are RoHS compliant
• Industrial temperature Range