DESCRIPTION
The DS1833 EconoReset uses a precision temperature compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power fail signal is generated which forces reset to the active (high) state. When VCC returns to an intolerance condition, the reset signal is kept in the active state for approximately 350 ms to allow the power supply and processor to stabilize.

FEATURES
■ Automatically restarts microprocessor after power failure
■ Maintains active-high reset for 350 ms after VCC returns to an in-tolerance condition
■ Accurate 5%, 10% or 15% microprocessor 5V power supply monitoring
■ Reduces need for discrete components
■ Precision temperature-compensated voltage reference and voltage sensor
■ Low-cost TO-92 package or surface mount SOT-223 package
■ Internal 5k pull-up resistor
■ Operating temperature of -40°C to +85°C