PSoC Functional Overview
The PSoC family consists of many Programmable System-on-Chips with On-Chip Controller devices. These devices are designed to replace multiple traditional MCU based system components with one low cost single chip programmable component. A PSoC device includes configurable analog and digital blocks and programmable interconnect. This architecture enables the user to create customized peripheral configurations to match the requirements of each individual application. Additionally, a fast CPU, flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

FEATUREs
■ Low power CapSense® block
    ❐ Configurable capacitive sensing elements
    ❐ Supports combination of CapSense buttons, sliders, touchpads, and proximity sensors
■ Powerful Harvard-architecture processor
    ❐ M8C processor speeds running up to 12 MHz
    ❐ Low power at high speed
    ❐ Operating voltage: 2.4 V to 5.25 V
    ❐ Industrial temperature range: –40 °C to +85 °C
■ Flexible on-chip memory
    ❐ 8 KB flash program storage 50,000 erase/write cycles
    ❐ 512-Bytes SRAM data storage
    ❐ Partial flash updates
    ❐ Flexible protection modes
    ❐ Interrupt controller
    ❐ In-system serial programming (ISSP)
■ Complete development tools
    ❐ Free development tool (PSoC Designer™)
    ❐ Full-featured, in-circuit emulator, and programmer
    ❐ Full-speed emulation
    ❐ Complex breakpoint structure
    ❐ 128 KB trace memory
■ Precision, programmable clocking
    ❐ Internal ±5.0% 6- / 12-MHz main oscillator
    ❐ Internal low speed oscillator at 32 kHz for watchdog and sleep
■ Programmable pin configurations
    ❐ Pull-up, high Z, open-drain, and CMOS drive modes on all GPIOs
    ❐ Up to 28 analog inputs on all GPIOs
    ❐ Configurable inputs on all GPIOs
    ❐ 20-mA sink current on all GPIOs
    ❐ Selectable, regulated digital I/O on port 1
        • 3.0 V, 20 mA total port 1 source current
        • 5 mA strong drive mode on port 1 versatile analog mux
    ❐ Common internal analog bus
    ❐ Simultaneous connection of I/O combinations
    ❐ Comparator noise immunity
    ❐ Low-dropout voltage regulator for the analog array
■ Additional system resources
    ❐ Configurable communication speeds
        • I2C: selectable to 50 kHz, 100 kHz, or 400 kHz
        • SPI: configurable between 46.9 kHz and 3 MHz
    ❐ I2C slave
    ❐ SPI master and SPI slave
    ❐ Watchdog and sleep timers
    ❐ Internal voltage reference
    ❐ Integrated supervisory circuit