OVERVIEW
The CMV12000 is a high speed CMOS image sensor with 4096 by 3072 pixels (22.5mm x 16.9mm) developed for machine vision and other applications. The image array consists of 5.5μm x 5.5μm pipelined global shutter pixels which allow exposure during read-out. The image sensor has 64 8-, 10- or 12-bit digital LVDS outputs (serial). The image sensor also integrates a programmable gain amplifier and offset regulation. Each channel runs at 600 Mbps which results in 132 fps frame rate at full resolution and 12-bit. When 10-bit per pixel is used, the frame rate increases to 300 fps. Higher frame rates can be achieved in row-windowing mode or row-subsampling mode. These modes are all programmable using the SPI interface. All internal exposure and read-out timings are generated by a programmable on-board sequencer. External triggering and exposure programming is also possible. Extended optical dynamic range can be achieved by multiple integrated high dynamic range modes.

FEATURES
● 4096 * 3072 active pixels on a 5.5um pitch
● Frame rate 132 frames/sec in 12-bit mode
● Frame rate 300 frames/sec in 10-bit mode
● Frame rate 330 frames/sec in 8-bit mode
● Row windowing capability (up to 32 separate windows)
● X-Y mirroring function
● Master clock max 600 MHz
● 64 LVDS-outputs @ 600 Mbps multiplexable to 32, 16, 8 ,4 ,2 and 1 output(s) at reduced frame rate
● LVDS control line with frame and line information
● LVDS DDR output clock to sample data on the receiving end
● High Dynamic Range modes supported (multiple slope and dual exposure)
● On chip temperature sensor
● On chip timing generation
● SPI-control
● Ceramic µPGA package (237 pins)
● 3.3V signaling

SPECIFICATIONS
● Full well charge: 13.5 Ke-
● Sensitivity: 4.64 V/lux.s (with microlenses)
● Dark noise: 13 e-
● Conversion factor: 0.075 bit/e-
● Dynamic range: 60 dB
● Parasitic light sensitivity: 1/50 000
● Dark current: 22 LSB/s
● Fixed pattern noise: <1 LSB (<0.1% of full swing in 10-bit mode)
● Power consumption: 4.2 W @ full speed