INTRODUCTION
The ADSP-21mod970-110 is a six-channel solution intended for remote access server and remote access concentrator applications. It combines a highly integrated DSP processor with downloadable software. All datapump and controller functions are implemented on a single 1.45-square-inch chip. This modem package allows the highest modem port density while achieving the lowest power consumption in a software upgradable platform.
FEATURES
High Density
Implements Six Modem Channels in One Package
304-Ball PBGA with a 1.45 Square Inch (961 sq. mm.)
Footprint
ISDN B-Channel HDLC
DATA Modulations
CCITT V.90 (30 kbps–56 kbps)
K56Flex™ (30 kbps–56 kbps)
ITU-T V.34: 33600 Bits/s–2400 Bits/s
CCITT V.32bis: 14400 Bits/s–7200 Bits/s
CCITT V.32: 9600 Bits/s, 4800 Bits/s
CCITT V.23
CCITT V.22/V.22bis: 2400, 1200, 600 Bits/s
CCITT V.21: 300 Bits/s
Bell 212A: 1200 Bits/s
Bell 103: 300 Bits/s
Start-Up Procedures:
ITU-T V.8
Error Correction and Data Compression:
CCITT V.42 Error Correction (LAPM and MNP2-4)
CCITT V.42bis Data and MNP Class 5 Compression
FAX Modem
V.17/V.29/V.27ter/V.21 Channel 2
T.30 Protocol
V.120
V.110
PPP Asynchronous Framing Support (RFC 1662)
Low Power
80 mW per Channel Typical Active
Low Power and Sleep Modes
On-Chip DS0/DS1 Interface
Full Function DMA Port
No External Memory Required
3.3 V Supply
Fully Upgradable RAM-Based Architecture
Fast Download
Full Image in 5 ms
High Speed 16-Bit Port Link Bus Provides Simple
Interface Between Host and Modem Pool