GENERAL DESCRIPTION
The ADM1072 is a logic controlled, dual P-channel switch with low on resistance and a built-in current limiter, capable of sourcing up to 1A from supply voltages between 2.7V and 5.5V. In addition to logic inputs that switch each channel on and off, the device has a standby input that switches the output current limit, making it ideal for use with USB peripherals. In normal operating mode and Standby mode the output current is typically limited to 500mA and 100mA respectively, as outlined by the USB2.0 Specification. This allows the system power supply to be protected against short-circuits and surge currents in peripheral USB devices powered via the ADM1072.
FEATURES
500mA Load Current (100mA in Standby Mode)
135mΩ On Resistance
Switchable Current Limit
50µA Typical Quiescent Current
10nA Typical Shutdown Current
40nA Typical Switch Off Leakage
Short-Circuit Protection
Thermal Shutdown
FLT Outputs
Small, 16-Pin QSOP Package
APPLICATIONS
Desktop Computers
Palmtop Computers
Notebook Computers
Hand-Held Instruments
Universal Serial Bus (USB)