GENERAL DESCRIPTION
The ADM1070 is a negative voltage hot swap controller that allows a board to be safely inserted and removed from a live –48 V backplane. The part achieves this by providing robust current limiting, protection against transient and nontransient short circuits and overvoltage and undervoltage conditions. The ADM1070 typically operates from a negative voltage of up to –80 V and can tolerate transient voltages of up to –200 V.
FEATURES
Allows Safe Board Insertion and Removal from a Live
–48 V Backplane
Typically Operates from –36 V to –80 V
Tolerates Transients up to –200 V (Limited by External
Components)
Accurate Programmable Linear Current Limit for
In-Rush Control and Short Circuit Protection
Programmable Timeout in Current Limit
Limited Consecutive Retry:
Auto-Restart after Current Limit Timeout
Shutdown after Seven Consecutive Auto Restarts
Provides Immunity from Step Induced Current Spikes
Default Timing Provided with no TIMER Capacitor
Single Pin Undervoltage/Overvoltage Detection
Programmable Operating Voltage Window
Programmable Undervoltage/Overvoltage Time Filter
Small 6-Lead SOT-23 Package
APPLICATIONS
Central Office Switching
–48 V Distributed Power Systems
Negative Power Supply Control
Hot Board Insertion
Electronic Circuit Breaker
High Availability Servers
Programmable Current Limiting Circuit
–48 V Power Supply Modules