GENERAL DESCRIPTION
The AD5200 and AD5201 are programmable resistor devices, with 256 positions and 33 positions respectively, that can be digitally controlled through a 3-wire SPI serial interface. The terms programmable resistor, variable resistor (VR), and RDAC are commonly used interchangeably to refer to digital potentiometers.
These devices perform the same electronic adjustment function as a potentiometer or variable resistor. Both AD5200/AD5201 contain a single variable resistor in the compact package. Each device contains a fixed wiper resistance at the wiper contact that taps the programmable resistance at a point determined by a digital code. The code is loaded in the serial input register. The resistance between the wiper and either end point of the programmable resistor varies linearly with respect to the digital code transferred into the VR latch. Each variable resistor offers a completely programmable value of resistance, between the A terminal and the wiper, or the B terminal and the wiper.

FEATURES
  AD5200—256-Position
  AD5201—33-Position
  10 kΩ, 50 kΩ
  3-Wire SPI-Compatible Serial Data Input
  Single Supply 2.7 V to 5.5 V or
  Dual Supply ±2.7 V for AC or Bipolar Operations
  Internal Power-On Midscale Preset

APPLICATIONS
  Mechanical Potentiometer Replacement
  Instrumentation: Gain, Offset Adjustment
  Programmable Voltage-to-Current Conversion
  Programmable Filters, Delays, Time Constants
  Line Impedance Matching