The 83C196LC, 83C196LD are low-cost, pin-compatible replacements for the existing 87C196JT and 87C196JR, respectively. These products feature an enhanced synchronous serial I/O (SSIO) port for more flexible communication to other devices. The enhanced SSIO is compatible with Motorola’s Serial Peripheral Interface (SPI) protocol and National’s Microwire protocol. To optimize die size, the A/D converter was removed for use in those applications that use an off-chip A/D converter.
The MCS® 96 microcontroller family members are all high-performance microcontrollers with 16-bit CPUs. The 83C196LC, 83C196LD are composed of a high-speed core with the following peripherals: an asynchronous/synchronous serial I/O port (8096 compatible) with a dedicated 16-bit baud-rate generator; an additional synchronous serial I/O port with full duplex master/slave transceivers; a flexible timer/counter structure with prescaler, cascading, and quadrature capabilities; six modularized, multiplexed high-speed I/O for capture and compare (called event processor array) with 200 ns resolution and double buffered inputs; and a sophisticated, prioritized interrupt structure with programmable peripheral transaction server (PTS). The 83C196LC has the highest memory density of the 52-pin MCS 96 microcontroller family, with 32 Kbytes of on-chip ROM, 1 Kbyte of on-chip register RAM, and 512 bytes of code RAM. The high memory integration of the 83C196LC supports high functionality in a low pin-count package and the use of the C programming language.

■ 22 MHz operation†
■ 32 Kbytes of on-chip ROM (LC)
   16 Kbytes of on-chip ROM (LD)
■ 1 Kbyte of on-chip register RAM (LC)
   384 bytes of on-chip register RAM (LD)
■ 512 bytes of on-chip code RAM (LC only)
■ Register-to-register architecture
■ Peripheral transaction server (PTS) with high-speed, microcoded interrupt service routines
■ Full-duplex serial I/O port with dedicated baud-rate generator
■ Enhanced full-duplex, synchronous serial I/O port (SSIO)
■ High-speed event processor array
   — Six capture/compare channels
   — Two compare-only channels
   — Two 16-bit software timers
■ Programmable 8- or 16-bit external bus
■ Design enhancements for EMI reduction
■ Oscillator failure detection circuitry
■ SFR register that indicates the source of the last reset
■ Watchdog timer (WDT)
■ Cost reduced replacements for the 87C196JT and 87C196JR.
■ –40° C to +125° C ambient temperature
■ 52-pin PLCC package