datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크
HOME  >>>  Philips Electronics  >>> 74LVCH32374A PDF

74LVCH32374A 데이터시트 - Philips Electronics

74LVCH32374A image

부품명
74LVCH32374A

Other PDF
  no available.

PDF
DOWNLOAD     

page
16 Pages

File Size
77.2 kB

제조사
Philips
Philips Electronics Philips

DESCRIPTION
The 74LVCH32374A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
The inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, the outputs can handle 5 V. These features allow the use of these devices in a mixed 3.3 or 5 V environment.


FEATURES
• 5 V tolerant inputs/outputs for interfacing with 5 V logic
• Wide supply voltage range from 1.2 to 3.6 V
• CMOS low power consumption
• MULTIBYTE™ flow-trough standard pin-out architecture
• Low inductance multiple power and ground pins for minimum noise and ground bounce
• Direct interface with TTL levels
• Bus hold on data inputs
• Typical output ground bounce voltage: VOLP < 0.8 V at VCC = 3.3 V and Tamb = 25 °C
• Typical output undershoot voltage: VOHV > 2 V at VCC = 3.3 V and Tamb = 25 °C
• Power off disables outputs, permitting live insertion
• Packaged in plastic fine-pitch ball grid array package.

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

부품명
상세내역
PDF
제조사
16-bit edge triggered D-type flip-flop with 5 Volt tolerant inputs/outputs (3-State)
Philips Electronics
16-bit edge-triggered D-type flip-flop; 5 V tolerant; 3-state
NXP Semiconductors.
16-bit edge-triggered D-type flip-flop; 5 V tolerant; 3-state
Nexperia B.V. All rights reserved
16-bit edge-triggered D-type flip-flop; 5 V tolerant; 3-state
Nexperia B.V. All rights reserved
3.3 V 32-bit edge-triggered D-type flip-flop; 3-state
Philips Electronics
3.3 V 32-bit edge-triggered D-type flip-flop; 3-state
NXP Semiconductors.
16-Bit Edge Triggered D-Type Flip-Flop with 3-State Outputs
Pericom Semiconductor
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
Unspecified
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
NXP Semiconductors.
9-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state
NXP Semiconductors.

Share Link: GO URL

EnglishEnglish Chinese简体中文 Japanese日本語 Russianрусский Spanishespañol

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]