Descriptions
The 30KPA Series is designed specifcally to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

FEATUREs
• 30kW peak pulse capability at 10/1000μs waveform,
   repetition rate (duty cycles):0.01%
• Glass passivated chip junction in P600 package
• Fast response time: typically less than 1.0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over-specifed voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• EFT protection of data lines in accordance with IEC 61000-4-4
• Low incremental surge resistance
• Typical IR less than 2μA when VBR min>73V
• High temperature to reflow soldering guaranteed:
   260°C/40sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension
• VBR @ TJ= VBR@25°C x (1+α T x (T J - 25))
   (α T:Temperature Coeffcient, typical value is 0.1%)
• UL Recognized epoxy meeting flammability rating V-0
• Matte tin lead–free plated
• Halogen free and RoHS compliant
• Pb-free E3 means 2nd level interconnect is Pb-free and
   the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)
  
Applications
   TVS components are ideal for the protection of I/O
   interfaces, VCC bus and other vulnerable circuits used in
   telecom, computer, industrial and consumer electronic
   applications.