STW10NC70Z 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
일치하는 목록
STW10NC70Z
STMicroelectronics
STW10NC70Z Datasheet PDF : 8 Pages
| |||
ELECTRICAL CHARACTERISTICS (CONTINUED)
SWITCHING ON (RESISTIVE LOAD)
Symbol
Parameter
td(on)
Turn-on Delay Time
tr
Rise Time
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
Test Conditions
VDD = 350V, ID = 5.3A
RG = 4.7Ω VGS = 10V
(see test circuit, Figure 3)
VDD = 560V, ID = 10.6 A,
VGS = 10V
STW10NC70Z
Min. Typ. Max. Unit
36
ns
12
ns
72
100
nC
19
nC
24
nC
SWITCHING OFF (INDUCTIVE LOAD)
Symbol
Parameter
tr(Voff)
Off-voltage Rise Time
tf
Fall Time
tc
Cross-over Time
Test Conditions
VDD = 560V, ID = 10.6 A,
RG = 4.7Ω, VGS = 10V
(see test circuit, Figure 5)
Min.
Typ.
36
36
77
Max.
Unit
ns
ns
ns
SOURCE DRAIN DIODE
Symbol
Parameter
Test Conditions
Min. Typ. Max. Unit
ISD
Source-drain Current
10.6
A
ISDM (2) Source-drain Current (pulsed)
42
A
VSD (1) Forward On Voltage
ISD = 10.6 A, VGS = 0
1.6
V
trr
Reverse Recovery Time
ISD = 10.6 A, di/dt = 100A/µs,
660
ns
Qrr
Reverse Recovery Charge
VDD = 50V, Tj = 150°C
8.7
µC
IRRM
Reverse Recovery Current
(see test circuit, Figure 5)
26
A
GATE-SOURCE ZENER DIODE
Symbol
Parameter
Test Conditions
BVGSO
Gate-Source Breakdown
Voltage
Igs=± 1mA (Open Drain)
αT
Voltage Thermal Coefficient T=25°C Note(3)
Rz
Dynamic Resistance
IGS = 50 mA
Note: 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
2. Pulse width limited by safe operating area.
3. ∆VBV = αT (25°-T) BVGSO(25°)
Min.
25
Typ.
1.3
90
Max.
Unit
V
10-4/°C
Ω
PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES
The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s
ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be
applied from gate to souce. In this respect the 25V Zener voltage is appropiate to achieve an efficient and
cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the
usage of external components.
3/8
Share Link: