HMC404(2001) 데이터 시트보기 (PDF) - Hittite Microwave
부품명
상세내역
일치하는 목록
HMC404 Datasheet PDF : 8 Pages
| |||
v02.1001
MICROWAVE CORPORATION
HMC404
GaAs MMIC SUB-HARMONICALLY
PUMPED IRM MIXER, 26 - 33 GHz
Pad Descriptions
Pad Number
Function
1
LO Port
2
Vdd
3
RF Port
4
IF2
5
IF1
Description
LO Port. This pad is AC coupled and matched to 50 Ohm from
13 - 16.5 GHz
Power supply for the LO Amplifier. An external RF bypass
capacitor of 100 - 330 pF is required. A MIM border capacitor is
recommended. The bond length to the capacitor should be as
short as possible. The ground side of the capacitor should be
connected to the housing ground.
RF Port. This pad is AC coupled and matched to 50 Ohm from
26 - 33 GHz.
IF Port. This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to pass
the necessary IF frequency range. For operation to DC, this pin
must not source/sink more than 3mA of current or die non-func-
tion and possible die failure will result.
IF Port. This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to pass
the necessary IF frequency range. For operation to DC, this pin
must not source/sink more than 3mA of current or die non-func-
tion and possible die failure will result.
Interface Schematic
5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 123
Share Link: 