datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

92HD73C 데이터 시트보기 (PDF) - Integrated Device Technology

부품명
상세내역
일치하는 목록
92HD73C
IDT
Integrated Device Technology IDT
92HD73C Datasheet PDF : 252 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
92HD73C
SIX CHANNEL HD AUDIO CODEC, PREMIUM WLP 3/4 COMPLIANT
PC AUDIO
AFG Power
State
D0-D2
D3
Input Enable Output Enable
Mute
Port Behavior
1
1
-
Not allowed. Port becomes input.
1
0
-
Active - port enabled as input
0
1
0
Active - port enabled as output
0
1
1
Mute - port enabled as output but drives silence
0
0
-
Inactive - Port keeps coupling caps charged (same
as mute.)
-
-
Inactive (lower power) - Port keeps output coupling
caps charged but consumes less power.
Table 2. Analog I/O Port Behavior
1.4.3.
Jack Detect
Plugs inserted to a jack on Ports A, B, C, & D are detected using SENSE_A. Plugs inserted to a jack
on Ports E, F, G, and H are detected using SENSE_B. The following table summarizes the proper
resistor tolerances for different analog supply voltages.
SENSE_C, is different from SENSE_A and SENSE_B. Because SENSE_C only determines the
presence of a plug for the CD port (port I), SENSE_C is a simple digital input pin referenced to the
analog supply. An internal pull-up resistor is provided. No external resistors are needed (jack switch
shorts to ground when a plug is inserted.) If external components are added, or if the pin is driven by
a logic gate, care should be taken to ensure that the pin voltage is above 70% of AVDD when no
plug is in the jack and less than 30% AVDD when a plug is inserted
AVdd Nominal
Voltage (+/- 5%)
5V
4.75V
4V
3.3V
Resistor Tolerance Resistor Tolerance
SENSE_A
SENSE_A
(If port D used) (If port D is not used)
Resistor Tolerance
SENSE_B
(If port H used)
1%
1%
1%
1%
1%
1%
0.50%
1%
0.50%
0.10%
1%
0.10%
Table 3: SENSE Resistor Tolerance
Resistor Tolerance
SENSE_B
(If port H is not used)
1%
1%
1%
1%
See reference design for more information on Jack Detect implementation.
1.4.4.
SPDIF Output
All SPDIF Outputs can operate at 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4KHz, and 192KHz as
defined in the Intel High Definition Audio Specification with resolutions up to 24 bits. This insures
compatibility with all consumer audio gear and allows for convenient integration into home theater
systems and media center PCs.
A second independant SPDIF Output is provided as an option for WLP compliant HDMI and SPDIF
outputs. Its function is identical to the primary SPDIF output.
14
SIX CHANNEL HD AUDIO CODEC, PREMIUM WLP 3/4 COMPLIANT
92HD73C
V 1.3 08/11

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]