SIT8103AI-83-28E-8.00000T 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

일치하는 목록

SIT8103AI-83-28E-8.00000T

High Performance 1-110 MHz Oscillator

Unspecified 

SiT8103

High Performance 1-110 MHz Oscillator

- ■ Part No. Guide How to Order

The Part No. Guide is for reference only. For real-time customization and exact part number, use the SiTime Part Number Generator.

SiT8103AC-13-18E -105.12345T

Part Family

“SiT8103”

Packaging

“T”: Tape & Reel, 3K reel

“Y”: Tape & Reel, 1K reel

Blank for Bulk

Revision Letter

“A” is the revision

Temperature Range

“C” Commercial, -20 to 70ºC

“I” Industrial, -40 to 85ºC

Output Driver Strength[6]

“–” Default

Package Size

“1” 2.5 x 2.0 mm

“2” 3.2 x 2.5 mm

“3” 5.0 x 3.2 mm

“4” 7.0 x 5.0 mm

“8” 7.0 x 5.0 mm[7]

Frequency

1.00000 to 110.00000 MHz

Feature Pin

“E” for Output Enable

“S” for Standby

Supply Voltage[8]

“18” for 1.8 V ±5%

“25” for 2.5 V ±10%

“28” for 2.8 V ±10%

“33” for 3.3 V ±10%

Frequency Stability

“1” for ±20 PPM

“2” for ±25 PPM

“3” for ±50 PPM

“8” for ±30 PPM

Notes:

6. Contact SiTime for different drive strength options for driving loads with faster rise/fall time spec than those shown in the electrical table, or reducing EMI.

7. Without Center Pad.

8. Supply voltage can be configured to any voltage up to 1 decimal place between 2.5V and 3.3V.

Frequency Stability vs. Temperature Range Options

Frequency

Stability (PPM)

±20

±25

±30

±50

Temperature

Range

C (-20 to +70°C)

I (-40 to +85°C)

C (-20 to +70°C)

I (-40 to +85°C)

C (-20 to +70°C)

I (-40 to +85°C)

C (-20 to +70°C)

I (-40 to +85°C)

1.8 V

3

–

3

3

3

Supply Voltage

2.5 V

3

2.8 V

3

–

–

3

3

3

3

3

3

3.3 V

3

–

3

3

3

© SiTime Corporation 2011. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of a

Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii)

unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper

installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.

Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by

operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or

usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any sitime product and any product documentation. products sold by

sitme are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved or

at stake. all sales are made conditioned upon compliance with the critical uses policy set forth below.

CRITICAL USE EXCLUSION POLICY

BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES

OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.

SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products

does not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to

the sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be

strictly prohibited.

Rev. 1.46

Page 4 of 4

Revised August 11, 2011

Share Link: