LA7578N 데이터 시트보기 (PDF) - SANYO -> Panasonic
부품명
상세내역
일치하는 목록
LA7578N Datasheet PDF : 18 Pages
| |||
Coil Specifications
VCO coil
T1
JAPAN
f = 58.75 MHz
LA7578N
US
f = 45.75 MHz
PAL
f = 38.9 MHz
AFT coil
T2
SIF coil
T4
SAW
Filter
(SANYO)
Picture
TSF1110M
TSF1110P
TSF1141P
M TYPE
P TYPE
P TYPE
Picture
TSF1203M
TSF1239P
TSF1233P
M TYPE
P TYPE
P TYPE
Picture
(MULTI)TSF5321
(BG) TSF5316U
(38M MULTI)
TSF5341U
K TYPE
U TYPE
U TYPE
( VCO tank circuit design considerations)
a. VCO tank circuit with an internal capacitor
When power is supplied to the IC, the heat from the IC is propagated to the PCB, and then to the VCO tank. In this instance,
the legs of the tank coil substitute for a heat sink. Because the heat radiates from there, heat is not easily propagated to the
VCO tank’s internal capacitor, reducing the effect on VCO drift when the power is on.
Accordingly, it is desirable for the design to basically seek to cancel out the temperature characteristics through the L and C.
Basically, it is best to use an L with a core material that has small temperature characteristics, and also to use a capacitor
with small temperature characteristics.
b. VCO tank circuit with an external capacitor
In the case of an external chip capacitor, the heat from the IC is propagated to the PCB, and then to the external chip
capacitor. As a result, the chip capacitor is affected by the heat, and its capacitance changes. In this case, because the VCO
coil is relatively unaffected, the end result is that the alignment point of the VCO tank changes.
Accordingly, it is best to use an L with a core material that has small temperature characteristics, and also to use a capacitor
with small temperature characteristics.
No.4037-17/18
Share Link: 