RT9013B 데이터 시트보기 (PDF) - Richtek Technology

부품명

상세내역

일치하는 목록

RT9013B

300mA, Low Dropout, Low Noise Ultra-Fast Without Bypass Capacitor CMOS LDO Regulator

Richtek Technology 

RT9013B

Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for

stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational

sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may

remain possibility to affect device reliability.

Note 2. θJA is measured in the natural convection at TA = 25°C on a low effective thermal conductivity single layer test board of

JEDEC 51-3 thermal measurement standard.

Note 3. Devices are ESD sensitive. Handling precaution is recommended.

Note 4. The device is not guaranteed to function outside its operating conditions.

Note 5. Quiescent, or ground current, is the difference between input and output currents. It is defined by IQ = IIN - IOUT under no

load condition (IOUT = 0mA). The total current drawn from the supply is the sum of the load current plus the ground pin

current.

Note 6. The dropout voltage is defined as VIN -VOUT, which is measured when VOUT is VOUT(NORMAL) - 100mV.

Note 7. Regulation is measured at constant junction temperature by using a 2ms current pulse. Devices are tested for load

regulation in the load range from 10mA to 300mA.

www.richtek.com

4

DS9013B-02 April 2011

Share Link: