MP1518(2006) 데이터 시트보기 (PDF) - Monolithic Power Systems

부품명

상세내역

일치하는 목록

MP1518
(Rev.:2006)

Fixed Frequency White LED Driver

Monolithic Power Systems 

TM

MP1518 – FIXED FREQUENCY WHITE LED DRIVER

OPERATION

The MP1518 uses a constant frequency, peak

current mode boost regulator architecture to

regulate the series string of white LEDs. The

operation of the MP1518 can be understood by

referring to the block diagram of Figure 1.

At the start of each oscillator cycle the FET is

turned on through the control circuitry. To

prevent sub-harmonic oscillations at duty cycles

greater than 50 percent, a stabilizing ramp is

added to the output of the current sense

amplifier and the result is fed into the positive

input of the PWM comparator. When this

voltage equals the output voltage of the error

amplifier the power FET is turned off.

The voltage at the output of the error amplifier

is an amplified version of the difference

between the 104mV reference voltage and the

feedback voltage. In this way the peak current

level keeps the output in regulation.

If the feedback voltage starts to drop, the output

of the error amplifier increases. This results in

more current flowing through the power FET,

thus increasing the power delivered to the

output.

FB

104mV

-

+

AMPLIFIER

-

+

PWM

COMPARATOR

CONTROL

LOGIC

SW

M1

+

1.3MHz

OSC

CURRENT

SENSE

AMPLIFIER

GND

Figure 1—Functional Block Diagram

MP1518 Rev. 1.6

www.MonolithicPower.com

4

7/25/2006

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

© 2006 MPS. All Rights Reserved.

Share Link: