MC33365(2006) 데이터 시트보기 (PDF) - ON Semiconductor

부품명

상세내역

일치하는 목록

MC33365
(Rev.:2006)

High Voltage Switching Regulator

ON Semiconductor 

MC33365

100

80

60

RθJA

Printed circuit board heatsink example

ÎÎÎÎÎ L

2.0 oz

Copper

ÎÎÎÎÎÎÎÎÎÎ L

3.0 mm

Graphs represent symmetrical layout

5.0

4.0

3.0

40

2.0

20

PD(max) for TA = 70°C

1.0

0

0

0

10

20

30

40

50

L, LENGTH OF COPPER (mm)

Figure 16. P Suffix (DIP−16) Thermal Resistance and

Maximum Power Dissipation versus P.C.B. Copper Length

PIN FUNCTION DESCRIPTION

Pin

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 1

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 2

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 3

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 4, 5, 12, 13

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 6

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 7

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 8

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 9

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 10

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 11

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 14, 15

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 16

Function

Startup Input

−

VCC

Gnd

RT

CT

Regulator Output

Compensation

Voltage Feedback

Input

BOK

−

Power Switch Drain

Description

This pin connects directly to the rectified ac line voltage source. Internally Pin 1 is tied to the

drain of a high voltage startup MOSFET. During startup, the MOSFET supplies internal bias, and

charges an external capacitor that connects from the VCC pin to ground.

This pin has been omitted for increased spacing between the rectified ac line voltage on Pin 1

and the VCC potential on Pin 3.

This is the positive supply voltage input. During startup, power is supplied to this input from

Pin 1. When VCC reaches the UVLO upper threshold, the startup MOSFET turns off and power is

supplied from an auxiliary transformer winding.

These pins are the control circuit grounds. They are part of the IC lead frame and provide a

thermal path from the die to the printed circuit board.

Resistor RT connects from this pin to ground. The value selected will program the Current Limit

Comparator threshold and affect the Oscillator frequency.

Capacitor CT connects from this pin to ground. The value selected, in conjunction with resistor

RT, programs the Oscillator frequency.

This 6.5 V output is available for biasing external circuitry. It requires an external bypass

capacitor of at least 1.0 μF for stability.

This pin is the Error Amplifier output and is made available for loop compensation. It can be used

as an input to directly control the PWM Comparator.

This is the inverting input of the Error Amplifier. It has a 2.6 V threshold and normally connects

through a resistor divider to the converter output, or to a voltage that represents the converter

output.

This is the non−inverting input of the bulk capacitor voltage comparator. It has an input threshold

voltage of 1.25V. This pin is connected through a resistor divider to the bulk capacitor line

voltage.

These pins have been omitted for increased spacing between the high voltages present on the

Power Switch Drain, and the ground potential on Pins 12 and 13.

This pin is designed to directly drive the converter transformer and is capable of switching a

maximum of 700 V and 1.0 A.

http://onsemi.com

6

Share Link: