MAX4659EUA(2001) 데이터 시트보기 (PDF) - Maxim Integrated
부품명
상세내역
일치하는 목록
MAX4659EUA Datasheet PDF : 12 Pages
| |||
High-Current, 25Ω, SPDT, CMOS
Analog Switches
ABSOLUTE MAXIMUM RATINGS
V+ to GND ..............................................................-0.3V to +44V
V- to GND ...............................................................-44V to +0.3V
V+ to V-...................................................................-0.3V to +44V
All Other Pins to GND (Note 1) ............ (V- - 0.3V) to (V+ + 0.3V)
Continuous Current COM, NO, NC (MAX4660)..............±150mA
Continuous Current COM, NO, NC (MAX4659)................±75mA
Continuous Current IN ......................................................±30mA
Peak Current COM, NO, NC
MAX4660 (pulsed at 1ms, 10% duty cycle) ..............±200mA
MAX4659 (pulsed at 1ms, 10% duty cycle) ..............±150mA
Continuous Power Dissipation (TA = +70°C)
8-Pin µMAX-EP (derate 10.3mW/°C above +70°C)
MAX4660.....................................................................825mW
8-Pin µMAX (derate 4.50mW/°C above +70°C)
MAX4659.....................................................................362mW
8-Pin SO-EP (derate 18.9mW/°C above +70°C)
MAX4660...................................................................1509mW
8-Pin SO (derate 5.88mW/°C above +70°C)
MAX4659.....................................................................471mW
Operating Temperature Ranges
MAX4659/MAX4660........................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on NO, NC, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maxi-
mum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +15V, V- = -15V, VIH = 2.4V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 2, 6)
PARAMETER
ANALOG SWITCH
SYMBOL
CONDITIONS
TA
MIN
Analog Signal Range
On-Resistance
On-Resistance Matching
Between Channels
On-Resistance Flatness
(Note 3)
NO or NC Off-Leakage
Current (Note 4)
COM On-Leakage
Current (Note 4)
VCOM,
VNO, VNC
V-
RON
ICOM = 50mA;
VNO or VNC = ±10V
+25°C
TMIN to TMAX
∆RON
ICOM = 50mA;
VNO or VNC = ±10V
+25°C
TMIN to TMAX
RFLAT (ON)
ICOM = 50mA;
VNO or VNC = -5V, 0, +5V
+25°C
TMIN to TMAX
INO(OFF) or VCOM = -14.5V, +14.5V; VNO
+25°C
-1
INC(OFF) or VNC = +14.5V, -14.5V
TMIN to TMAX -10
ICOM(ON)
VCOM = +14.5V, -14.5V;
VNO or VNC = +14.5V,
-14.5V, or floating
+25°C
-2
TMIN to TMAX -20
DYNAMIC CHARACTERISTICS
Transition Time
Break-Before-Make Delay
tTRANS
tBBM
VNO or VNC = 10V;
RL = 300Ω,
CL = 35pF; Figure 3
VNO or VNC = 10V;
RL = 300Ω,
CL = 35pF, Figure 3
+25°C
TMIN to TMAX
+25°C
10
TMIN to TMAX
5
TYP
18
0.4
0.5
0.01
0.02
85
20
MAX UNITS
V+
V
25
Ω
30
1.2
Ω
1.5
1.5
Ω
2
1
nA
10
2
nA
20
150
ns
200
ns
2 _______________________________________________________________________________________
Share Link: 