EN25F05 데이터 시트보기 (PDF) - Eon Silicon Solution Inc.

부품명

상세내역

일치하는 목록

EN25F05

512 Kbit Serial Flash Memory with 4Kbytes Uniform Sector

Eon Silicon Solution Inc. 

EN25F05

Figure 19. Read Identification (RDID)

Enter OTP Mode (3Ah)

This Flash has a extra 256 bytes OTP sector, user must issue ENTER OTP MODE command to

enter OTP mode before reading / programming or erasing OTP sector. After entering OTP mode,

the OTP sector is mapping to sector 15, SRP bit becomes OTP_LOCK bit and can be read with

RDSR command. Program / Erase command will be disabled when OTP_LOCK is ‘1’

WRSR command will ignore the input data and program LOCK_BIT to 1.

User must clear the protect bits before enter OTP mode.

OTP sector can only be program and erase when LOCK_BIT equal ‘0’ and BP [2:0] = ‘000’. In OTP

mode, user can read other sectors, but program/erase other sectors only allowed when OTP_LOCK

equal ‘0’.

User can use WRDI (04H) command to exit OTP mode.

Figure 20. Enter OTP Mode

This Data Sheet may be revised by subsequent versions 20 ©2004 Eon Silicon Solution, Inc., www.essi.com.tw

or modifications due to changes in technical specifications.

Rev. B, Issue Date: 2008/06/23

Share Link: