CM2030(2012) 데이터 시트보기 (PDF) - ON Semiconductor
부품명
상세내역
일치하는 목록
CM2030 Datasheet PDF : 11 Pages
| |||
CM2030
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
VCC5, VCCLV
DC Voltage at any Channel Input
6.0
V
[GND − 0.5] to [VCC + 0.5]
V
Storage Temperature Range
−65 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 3. STANDARD (RECOMMENDED) OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Units
5V_SUPPLY Operating Supply Voltage
−
5
5.5
V
LV_SUPPLY Bias Supply Voltage
1.0
3.3
5.5
V
CE_SUPPLY Bias Supply Voltage
3.0
3.3
3.6
V
−
Operating Temperature Range
–40
−
85
°C
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 7)
Symbol
Parameter
Conditions
Min Typ Max Units
ICC5
Operating Supply Current
5V_SUPPLY = 5.0 V,
CEC_OUT = 3.3 V,
LV_SUPPLY = 3.3 V,
CE_SUPPLY = 3.3 V, DDC = 5 V
(Note 12)
300 350 mA
ICCLV
ICCCE
Bias Supply Current
Bias Supply Current
LV_SUPPLY = 3.3 V (Note 12)
CE_SUPPLY = 3.3 V, CEC_OUT = 0 V
(Notes 12 and 13)
60 150 mA
60 150 mA
ICEC
VDROP
ISC
IOFF
Current Source on CEC Pin
CE_SUPPLY = 3.3 V,
111 120 128 mA
5V_OUT Overcurrent Out Put Drop
5V_OUT Short Circuit Cur Rent Limit
5V_SUPPLY = 5.0 V, IOUT = 55 mA
65 100 mV
5V_SUPPLY = 5.0 V, 5V_OUT = GND 90 135 175 mA
OFF State Leakage Current, Level Shifting
NFET
LV_SUPPLY = 0 V
0.1
5
mA
IBACKDRIVE, Current Through CE−REMOTE_OUT when CE−REMOTE_IN = CE_SUPPLY <
CEC
Powered Down
CE_REMOTE_OUT
0.1 1.8 mA
IBACKDRIVE, Current Through TMDS Pins when Powered All Supplies = 0 V,
TMDS
Down
TMDS_[2:0]+/, TMDS_CK+/ = 4 V
0.1
5
mA
IBACKDRIVE, Current Through 5V_OUT when Powered
5V_OUT Down
All Supplies = 0 V,
5V_OUT_PIN = 5 V
0.1
5
mA
IBACKDRIVE, Current Through DDC_DAT/CLK_OUT when All Supplies = 0 V,
DDC
Powered Down
DDC_DAT/CLK_OUT = 5 V,
DDC_DAT/CLK_IN = 0 V
0.1
5
mA
IBACKDRIVE, Current Through HOTPLUG_DET_OUT when All Supplies = 0 V,
HOTPLUG Powered Down
HOTPLUG_DET_OUT = 5 V,
HOTPLUG_IN = 0 V
0.1
5
mA
CECSL
CEC Slew Limit
Measured from 10−90% or 90−10%
0.26 0.65 V/ms
7. Operating Characteristics are over Standard Operating Conditions unless otherwise specified.
8. Standard IEC61000−4−2, CDISCHARGE = 150 pF, RDISCHARGE = 330 W, 5V_SUPPLY = 5 V, 3.3V_SUPPLY = 3.3 V, LV_SUPPLY = 3.3
V, GND = 0 V.
9. Human Body Model per MIL−STD−883, Method 3015, CDISCHARGE = 100 pF, RDISCHARGE = 1.5 kW, 5V_SUPPLY = 5V, 3.3V_SUP-
PLY = 3.3 V, LV_SUPPLY = 3.3 V, GND = 0 V.
10. Intra−pair matching, each TMDS pair (i.e. D+, D–)
11. These measurements performed with no external capacitor on VP (VP floating)
12. These static measurements do not include AC activity on controlled I/O lines.
13. This measurement does not inclue supply current for the 120 mA current source on the CEC pin.
http://onsemi.com
7
Share Link: 