APX9131(2009) 데이터 시트보기 (PDF) - Anpec Electronics

부품명

상세내역

일치하는 목록

APX9131
(Rev.:2009)

Hall Effect Micro Switch IC

Anpec Electronics 

APX9131

Application Information

It is strongly recommended that an external bypass ca-

pacitor be connected (in close to the Hall sensor) be-

tween the supply and the ground of the device to reduce

both external noise and noise generated by the chop-

per-stabilization technique. This is especially true due

to the relatively high impedance of battery supplies.The

output is an open drain output, it must be connected a pull-

up resistor to a supply voltage which is lower than 5V,

connect a 50kΩ resistor to VDD in common use.

Copyright © ANPEC Electronics Corp.

7

Rev. A.12 - Aug., 2009

www.anpec.com.tw

Share Link: