AKD5366(2007) 데이터 시트보기 (PDF) - Asahi Kasei Microdevices

부품명

상세내역

일치하는 목록

AKD5366
(Rev.:2007)

AK5366 Evaluation Board Rev.A

Asahi Kasei Microdevices 

[AKD5366]

Control Software Manual

Set-up of evaluation board and control software

1. Set up the AKD5366 according to the “Evaluation Board Manual”.

2. Connect IBM-AT compatible PC with AKD5366 by 10-line type flat cable (packed with AKD5366). Take care of the

direction of 10pin header. (Please install the driver in the CD-ROM when this control software is used on Windows

2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device control software”. In case of

Windows95/98/ME, this installation is not needed. This control software does not operate on Windows NT.)

3. Insert the CD-ROM labeled “AKD5366 Evaluation Kit” into the CD-ROM drive.

4. Access the CD-ROM drive and double-click the icon of “akd5366.exe” to set up the control program.

5. Please evaluate according to the following.

Operation flow

Keep the following flow.

1. Set up the control program according to explanation above.

2. Click “Port Reset” button.

Explanation of each buttons

1. [Port Reset]:

2. [Write default]:

3. [All Write]:

4. [Function1]:

5. [Function2]:

6. [Function3]:

7. [Function4]:

8. [Function5]:

9. [SAVE]:

10. [OPEN]:

11. [Write]:

Set up the USB interface board (AKDUSBIF-A).

Initialize the register of AK5366.

Write all registers that is currently displayed.

Dialog to write data by keyboard operation.

Dialog to write data by keyboard operation.

The sequence of register setting can be set and executed.

The sequence that is created on [Function3] can be assigned to buttons and executed.

The register setting that is created by [SAVE] function on main window can be assigned to

buttons and executed.

Save the current register setting.

Write the saved values to all register.

Dialog to write data by mouse operation.

Indication of data

Input data is indicated on the register map. Red letter indicates “H” or “1” and blue one indicates “L” or “0”. Blank is the

part that is not defined in the datasheet.

<KM073601>

-7-

2007/04

Share Link: